Raymarine

Raymarine AIS700 Class B AIS With Splitter

$1,199.99

-

Model Number: E70476

Condition: Brand New

Availability: In stock

Description

Raymarine AIS700 Class B AIS with Splitter

Model: E70476

  • Full transmit and receive AIS for enhanced situational awareness and safety
  • Latest SO-TDMA networking for longer range and faster performance
  • Built-in antenna splitter simplifies installation with existing VHF radio antenna
  • NMEA2000, NMEA0183, PC and SeaTalkng Compatible
  • Software or hardware switchable Silent Mode for enhanced security when needed

The AIS700 from Raymarine is a Class B Automatic Identification System (AIS) transceiver designed for use with Raymarine multifunction navigation display systems. As a Class B AIS transceiver, the AIS700 not only receives broadcasts from other vessels, it also transmits your own boat’s information too helping you to be seen on other vessels’ systems.

Specifications

Evironmental
Operating temperature -15°C to +55°C
Storage temperature -20°C to +75°C
Water ingress IPX6 and IPX7
Humidity Up to 93% @ 40°C
Power
Power Supply 12v and 24 nominal
Power Consumption <3W
<3W 3A
Load Equivalency Number 1 LEN
RF Specifications
DSC Receiver Implemented by time sharing with one TDMA receiver
Receiver 1 band 156.025 MHz to 162.025 MHz (in 25KHz steps)
Receiver 2 band 156.025 MHz to 162.025 MHz (in 25KHz steps)
Transmitter band 156.025 MHz to 162.025 MHz (in 25KHz steps)
Transmitter specification To meet IEC 62287-2 relevant sections
Receiver specification To meet IEC 62287-2 relevant sections
Transceiver specification To meet IEC 62287-2 relevant sections
GPS receiver u-blox MAX-M8W
GPS receiver channels 72 channels
GPS Cold start acquisition time 26s nominal
Positional source GPS & GLONASS
AIS performance 5W SOTDMA
External Connection
VHF antenna connector type SO-239 co-axial
VHF radio connector type SO-239 co-axial
GNSS antenna connector 50 Ohm TNC co-axial
NMEA2000 DeviceNet male
USB Micro-B
External interface isolation NMEA0183 and NMEA 2000 interfaces to incorporate galvanic isolation from power supply as required by the relevant interface specification.
NMEA0183 interface 1 (MFD connection) NMEA 0183 HS (IEC 61162-1) compliant, bi-directional, RS422 levels. 4 wire interface (differential signalling). Configurable baud rate. Input to MFD from AIS.
NMEA0183 interface 2 (NMEA0183 instrument connection) NMEA 0183 (IEC 61162-1) compliant, bi-directional, RS422 levels. 4 wire interface (differential signalling). 4 wire interface (differential signalling) Configurable baud rate
USB interface (PC connection) Protocol NMEA 0183 HS (IEC 61162-1) compliant, bi-directional USB port, 38.4 kBaud

What’s in the Box:

  • AIS700 Class B AIS Transceiver with built-in VHF antenna splitter
  • GNSS (GPS) Antenna
  • Power / data cable 2m (6.56 ft)
  • VHF Radio cable 1m (3.28 ft)
  • DeviceNet to SeaTalkng® adaptor cable 1m (3.28 ft)
  • GNSS antenna gasket
  • GNSS antenna pole mount
  • Unit fixings (4 x No.8×19 self tapping screws)
  • M5 nut and washer (grounding)
  • Documentation kit
  • GNSS antenna fixings (3 x M3x40 stud and thumb nut)
  • Software CD
0